Articles

Are you considering Torque when selecting DC motors? If so, we are right here to provide you with all the help and give you some

When traditional machining methods reach their limit, electric discharge machining can be the answer. The EDM process allows for high accuracy and is applicable for

When it comes to DC motor, no one knows it better than Kinmore motor, who always strives to develop, design, and manufacture micro precision DC

Brushless DC motors are widely used in industrial applications across the world. At the most basic level, there are not only brushed or brushless motors

Although we have learned what the DC motor is in the previous article, what we know about DC Motor is just the tip of the iceberg. Today,

A “varistor” is a resistance device with non-linear volt-ampere characteristics. It is mainly used for Voltage clamping when the circuit is subjected to overVoltage and

Many industries depend on DC Motors. In the decades before the DC Motor refined, their use was limited. Today many different applications are heavily dependent

A gear motor is an all-in-one combination of an electric motor and a gearbox. That makes it a simple, cost-effective solution for high-Torque, low-Speed applications

The noise of different mechanical equipment may be large or small, but they should all have a normal scale specification value. When the specification value

1. Brushless DC Motor Principles Brushless DC motors use permanent magnets similar to motors, but are constructed “from back to front.” Magnets are fixed to

The brushless DC (BLDC) motor’s increasing popularity is due to the use of electronic commutation. That replaces the conventional mechanics comprised of brushes rubbing on

As the executive component of the motor, the DC motor has a closed main magnetic circuit inside. The main magnetic flux flows in the magnetic

The definition of vibration motor The vibration motor is a coreless DC motor whose size is compact. The original purpose of this motor is to

There are different types of DC motors with different Speeds, Torques, and applications. Generally, DC motors can be divided into brushed and brushless DC motors.

The International Organization for Standardization (ISO) is an international standard-setting body composed of representatives from various national standards organizations. Founded on 23 February 1947, the

A gear drive requires two gears for operation. The two gear drives are spur cut, and the drive gear receives force from the power Output.

When it comes to Speed control, you may think the choice is between an inverter driven three-phase motor or servo motor, but did you know that brushless DC motors specialize

The characteristics mainly lie in the two aspects for manufacturing of the gear motor. One is the mechanical process, and the other is a special

A micro DC reduction motor is a kind of gear reduction motor referring to reduction transmission equipment, also known as DC reduction gearbox. It is

The inverse electromagnetic field is caused by the coil rotation inside the stator magnetic field. Its unit is the same as the Voltage, the volt.

The definition of the armature In electrical engineering, an armature is the component of an electric motor which carries alternating Current. The armature windings conduct AC even

A varistor is an electronic component with an electrical resistance that varies with the applied Voltage. Also known as a Voltage-dependent resistor (VDR), it has a nonlinear, non-ohmic Current-Voltage characteristic that is similar to that of a diode.

Being a transmission device that is used widely, the gear motor mainly consists of the drive motor and the reducer. According to the transmission structure

DC motor DC motors are powered from direct Current (DC) power and are mechanically commutated machines. DC motors have a Voltage-induced rotating armature winding, and