Search

Analysis of gear drive system

A gear drive requires two gears for operation. The two gear drives are spur cut, and the drive gear receives force from the power Output. The drive gear then transfers power to the driven gear. The gear drive relies on two or more intermeshing gears to transmit power. The gear transmission ratio is accurate, which is suitable for high manufacturing precision and inStallation accuracy. The gear drive system has the following features. 

A gear drive requires two gears for operation. The two gear drives are spur cut, and the drive gear receives force from the power Output. The drive gear then transfers power to the driven gear. The gear drive relies on two or more intermeshing gears to transmit power. The gear transmission ratio is accurate, which is suitable for high manufacturing precision and inStallation accuracy. The gear drive system has the following features. 

 

Analysis of gear drive system

The advantages of the gear drive system:

1. The instantaneous transmission ratio is constant, and the work stability is high;

 

2.Using non-circular gears, the instantaneous transmission ratio can be designed according to the required change rule;

 

3.Easy maintenance and uniform load distribution.

 

4.The gear ratio has a wide Range of variation, which is suitable for deceleration or Speed increase transmission. Especially when adopting planetary drive, the gear ratio can be made very large;

 

5.The peripheral Speed and Speed of the gear can be made very large;

 

6.The transmission power is large, and the carrying capacity is high;

 

7.High transmission efficiency, especially for cylindrical gear pairs with high precision.

 

8.Compact structure, such as the use of planetary transmission, less tooth difference transmission, or harmonic gear transmission, the components can be further reduced, becoming a coaxial transmission. The planetary transmission is suitable for high precision drives. The diameter Range of the planetary gearbox we made is 3.4-38mm.Easy maintenance and uniform load distribution.

 

Analysis of gear drive system

The disadvantages of the gear drive system:

1.High precision in manufacturing and inStallation;


2.The manufacturing process is complicated and costly.

 

3.Not suitable for transmission between two axes at a long distance.

Read More

Maintenance of EDM

What is EDM?

When traditional machining methods reach their limit, electric discharge machining can be the answer. The EDM process allows for high accuracy and is applicable for any conductive material.   Brief introduction of EDM Electrical discharge machining, or EDM, is a non-traditional method in which material is removed from a workpiece

Read More »
DC motor versus Servo motor

DC motor versus Servo motor

When it comes to Speed control, you may think the choice is between an inverter driven three-phase motor or servo motor, but did you know that brushless DC motors specialize in Speed control? The brushless DC motor is growing in popularity in the world of Speed control. However, not everyone is familiar with the power

Read More »
gear motor

The classification of gear motor

Being a transmission device that is used widely, the gear motor mainly consists of the drive motor and the reducer. According to the transmission structure and application fields, gear motor can be mainly divided into large-scale gear motor, mini gear motor, gear reduction motor, planetary gear motor, dc gear motor,

Read More »

Contact Form

Your message will be replied in 24 hours.

Personal Information
Product Inquiry
>> Attached Files